The post Trough-O-Matic Float Valve appeared first on Stable Farm & Tack Store.

The post Trough-O-Matic Metal Float Valve appeared first on Stable Farm & Tack Store.

Model MPM10 – swine

Model MPM10A – calves, poultry and sheep. For poultry, invert flap.

Model MPM20 – cattle, horses, elk and other wildlife
C

heck these Brower quality features:

Model MPM10 is identical to Model MPM10A except the MPM10 flaps are 2 inches shorter than those of the MPM10A and also MPM10 flaps have stainless guards.
Nature’s ground water temperature does the job. Our energy-free waterers operate like a thermos all year long. Cool, fresh water in summer’s hot sun. Dependable water in sub-zero temperatures.

1. Stainless steel bolts and removable top afford easy access to plumbing. Optional wing bolts (Model OF403WB) are available for
grade A inspections.

2. Unique baffles guard against icing and keep valve operating under severest conditions.

3. Notched flanges for easy anchoring.

4. Achieve a quality installation with Brower anchor package. Order Model 383344 which contains 4 anchor bolts, 4 flat washers, 4 plates and 4 nuts, all stainless steel.

5. Weather strip and an insulated sleeve for the supply line come with each unit.

6. Simple installation – no heat well needed; use an 8-12 inch tile; can be fitted on most existing pads.

7. Sealed bottom keeps out moisture and rodents.

8. Two 2-inch drain holes for fast clean out.

9. Foam insulation between walls has an R-value of 7.14 inch.

10. Double wall construction contains hindered amine light stabilizer, the most effective ultraviolet inhibitor.

11. Seamless sidewall cannot leak.

12. Tolerance to water level – you don’t have to worry about summer and winter water levels. (If the water level is too high on a ball or float type closure, closures can stick.).

13. Dependable, non siphoning valve – proven and trouble free.

14. Animal friendly insulated flaps. Livestock can drink out of both flaps at the same time – not always so with a ball closure. No pulleys and cables to foul and rust.

WHY OUR FLAP IS BETTER THAN A BALL OR FLOAT CLOSURE…
Each time an animal drops our flap, water and ice explode off the surface – greatly reducing ice buildup. Our Brower Drinkers have no recessed areas where water can collect and freeze.

PRECAUTIONS YOU SHOULD OBSERVE…

The key to trouble-free use is carefully read the installation instructions. You can probably use an existing tile if your supply line has stayed open with no supplemental heat. The new installation must be made without the supply line touching the riser tile and there must be no debris or dirt in the riser tile. For best protection, we recommend that a new riser tile of at least 8″ diameter be installed. There must be an airtight seal to the mounting pad. Brower units need to be installed on the level. There must be sufficient drinking activity.

The post Energy Free Waterer appeared first on Stable Farm & Tack Store.

THE RACE IS OVER. OUR PERFORMANCE ONE BOX STALL DRINKER WINS BY SEVERAL LENGTHS For corner installations in box stalls–but can be installed outdoors as well. Stainless steel access plates. Foam filled-R value of 7.5 per inch. Fill valve delivers about 2 1/2 gallons (9.5 liters) per minute; simple water level adjustment, easy to clean.Half moon design on back corner for securing up to a 2 inch (5.1 cm) PVC tube for plumbing from above or below. Optional heater, 250 watts, 110 volts. We tested this unit in our own cold chamber. Our chamber can go as low as minus 30 degrees F (-34.4 degrees C). No freezing occurred at this temperature-even after 7 days!

Heating cost is minimal-less than $10.00 per heating season.

Optional ground mount tube (Model HT10) for hookup to underground service connections and for outdoor installations available in light gray.

Double wall, single piece poly construction — ALL SMOOTH!

Internal 3/4″ (1.9 cm) AND external 2″ (5.1 cm) drains; drinker is very easy to clean-no disassembly for cleaning required.

Dimensions:
15 1/2″ x 15 1/2″x 12″ High

The post Box Stall Drinker for Horses appeared first on Stable Farm & Tack Store.

The post Automatic drinking bowl for all livestock. appeared first on Stable Farm & Tack Store.

• Dependable, non-siphoning Durapride valve. (30 years of use) A typical annual heating bill with Model MPO12 might be somewhat higher than with Model MPO17 — maybe $15.00 instead of $10.00! Model MPO12 has the same foam filled double wall construction. Also, our patented ports on the sidewall of the valve cover allow heat dispersal from underneath the valve cover into the drink openings.

• Proven (20 years of use) 250 watt heater

• Two inch built-in drain

• Overflow port can be used either as an internal drain or it can be used for optional continuous flow operation.

• Rugged notches for secure anchoring.

• Spring loaded pin allows easy removal of access panel. It takes a quarter turn with a straight edge screwdriver. Lower access opening is 6 inches x 19 inches.

Dimensions:

25″H x 20″W x 31″L

The post 12 Gallon Poly Water appeared first on Stable Farm & Tack Store.

Electrically Heated *Energy Efficient Livestock Waterer, You Only Need One Unit To Water Up To 150 Head Of Most Any Species

A typical winter heating bill —$10.00 or less! Why? Two reasons. Our drinker has 17 gallons of capacity. Incoming water carries heat energy. The more water, the more heat. Our R-valve of 7.5 per inch holds the heat provided by incoming water. Second, our supply line is in the water.You don’t need extra heat to keep the line above the ground open.You do need proper installation to prevent the supply line underneath
the drinker from freezing.

Two large drink openings 8” x 14” each. Drinker wells are 14” deep allowing most any animal to drink naturally. 100% poly construction. Molded with the most effective ultraviolet inhibitor. Tough enough for years of
outdoor use. Notched flanges for easy anchoring. Two 2 inch side drains and 1 threaded bottom port for optional inside drain. Stainless steel spring loaded valve cover removes easily. No loose parts to lose. Over 300 square inches of access for easy hook up.

Dimensions:
23″H x 19″W x 29 1/2″L

The post Seventeen Gallon Poly Waterer appeared first on Stable Farm & Tack Store.

Beefy • Energy efficient • Ruggedly built but simple. You can expect an entire winter’s heating bill of $25.00 or less — and this from a drinker that can water 250 head of beef using only 250 watts. Our drinker has foam filled double wall construction which adds to the efficiency. More importantly, the vertical wall of our valve cover has PATENTED ports which allow natural water circulation and efficient heat dispersal into the drinker troughs.

• Spring loaded pin allows access panel to pop off with the twist of a screwdriver. There are no loose parts.

• Two inch built-in drain

• Stainless steel spring loaded attachment pins make cover removal and replacement easy. Again, there are no loose parts.

• Recessed, protected notches for secure anchoring

• Proven (20 years of use) 250 watt heater.

• Overflow port

• Dependable non-siphoning Durapride valve

Dimensions:

34″H x 29″W x 42″L

The post 25 Gallon Poly Waterer appeared first on Stable Farm & Tack Store.

The post Showman ® 100% PVC collapsible bucket. appeared first on Stable Farm & Tack Store.